Spike Hike Kit DBXL 2.0 / DBXL-E 2.0 Komponenten:Roof LED but have enough slack

but have enough slack

Connect the front LED directly to an available slot on the receiver

Lösen Sie die zwei Schrauben oberhalb vom Spoiler und anschließend die vier Schrauben seitlich an der Spoiler-Halterung

Place the roof LED below the roof by turning the four included M3x16 screws from the top through the cage into the holes of the front LED

The white cable in slot 1

Spike Hike Kit DBXL 2.0 / DBXL-E 2.0 Komponenten:Roof LED but have enough slackThe kit includes the following components: Front LEDs Extremely bright front LEDs easily installed on the front bumper. Roof LED Extremely bright LED that is integrated into the original LED housing, replacing the original LED light strip. Rear LED Extremely bright rear LED easily attached to the spoiler bracket. Installation Instructions The installation is very simple; no holes need to be drilled, no parts need to be cut or sawed. Thus, dismantling